- To improve our sound engine Proton Campro
- Hope a next new car Proton model can more better and good function
- Bulid a USB can open a Music like MP3

side mirrors..
electronic steering
abs please

what is cons
optimum level speed shud be higher, now is at 90kmh @ 3k rpm, pls make it 110kmh at 3k rpm

-Improve sound insulation.
-I think i want a more thicker seat(coz i'am a big person)
- Maybe a i want more goods service of Proton Service then complaints about car.I am satisfied with the price i paid.

- get a better CVT with torque converter
- improve NVH - minimal to no sound insulation observed
- improve ergonomics and touch points

- Improve the NVH, put a lot more sound insulation and dampening(at least between the engine and cabin). Seriously this is not a joke.
- Make the door a lot heavier so doesn't feel like tin box. Put in sound proof there or make the material a little more thick on doors so the occupant feels a little more safer and have a decent feel and sound of the door.
- After sale, yes, after sale, please improve the after sale service.
- Put in some soft touches of good quality plastic and grille here and there for the interior
- Engine cover, please put one.
- CVT not 100% smooth, It suppose to be smooth as knife cut through butter but this one got a few unintended chunks in it. Jerking at low speed and while reversing.

- Put some noise suppression
- Improve the electrical system
- Rear suspension need to be more stiff

If potential buyers really need to consider this car due to tight budget, I would recommend the 1.6 CVT. 1.3 is quite underpowered if there are more than 3 adults in the car. Skip the 1.3, it is really underpowered and fuel consuming because you will need to rev hard!

-Proton had to improve on their audio player was which is having the Bluetooth function that allows user to connect for answer phone call and play song via the phone .
-the multi-info display should impose for the fuel consumption reading and range .
-the car should come with 60:40 fold seat for more space to put on some long item .

a. This car is considered as proton flagship car. Make it better by improving interior quality. Exterior too.
b. Overall the car is good. Proton need to focus on their engine. Fuel consumption and power.
c. We are far away from Japanese car but at least we try.

1. better fit and finish
2. better materials
3. engine should be smoother

1. seat position should be lower.
2. improve noise insulation
3 bigger rims and tyres. 175/65/R14 would be better.
4. usb connectivity
5. LED speedometer like what can be found in Myvi.

To Proton!! You can strip off anything to cut costs!! but please DO NOT remove ABS in any of your upcoming models! I have experienced events where i wish my car have ABS system. Please!! ABS really can save life!

-Size 15 Tyre
-Safety features
-Good body condition
-Brake system

- Improve NVH of the cabin
- Annoying glaring fog light
- Better fit & finish of interior & exterior panels
- Quality control consistency
- Improve CVT startup operation
- Include ESC & side + curtain airbag
- Include Brake Assist to the brake system
- Better seats
- Tilt & telescopic steering

1. need to improve after sales quality and people by charging less and conducting their work more efficiently
2. Proton needs to tweak the cvt to reduce jerkiness and further improve fuel consumption
3. take more effort to improve interior quality even for entry level car.

- Sound-proof of the car had to be improve.
- Service centre works have to be quicker where customer doesn't have to wait half day to have their car service(normal service). P.s : checking for other error or problems may take time.
- Check for the problem when receive customers complains about their cars.

-rims 14' mush be replace with 15'' to look more sporty.
-door close absorb must be more efficiency.

sound proof, tyre size, head light, service center workers attitute especially HQ the so called center of excellent, selling price & warranty period.

-Better service centre
-Quality for B segment car(currently proton only focusing on C segment car (preve,suprima) with so much technologies and nice interior and let saga with poor looks interior)
-need to improve cvt gearbox
-soundproof is needed for better driving experience
-improve sound system
-more airbags for safety wise(compare to others B segment manufacturer
-improve comfort suspension for better riding /long journey driving
-change rear brake to disk brake

Chassis can be improved for more better sound proofing.

- Must be go on with more fuel economic like Mivec engine or Hybrid engine and power pressure like Ecoboost or TSI engine

- There's a need to improve the build quality of the chassis

Improve quality of service like timing and more professional when receive customer complain.
Rear drum brak knocking even many times service at proton service center on it knocking sound appear.
Build Quality of the car.

- Improve on NVH
- Fuel economy
- Safety features
- Build quality
- Fuel tank pressure system

- Improvement of NVH insulation
- Addition of more basic equipment ( Cruise Control, Dehumidifier, Electronic Wing Mirror Fold, etc)
- Refinement of the CVT gearbox

-Build quality is a very important point for proton to improve.
-Attitude of service center are bad, they just find excuse to avoid fixing any problem.

Quality of interior and design
Better soundproofing would be better
CVT transmission smoothness could be better

Service
Quality

-service centre need to improve, alignment & balancing service must be provided by standard, 1 hour normal service must be made standard, car problems must able to be repaired or diagnosed on weekends
-few issues with the one of the passenger door and trunk which are hard to close, the door has been rectified but the trunk has recurring problem, may need to change the boot latch altogether
-i've experienced extra vibration noise at the gearbox area, this has since been rectified

- Overall built quality needs to be improved
- Should have higher standards of QC
- Warranty claims to be more feasible at Proton service centers
(only Shah Alam HQ can do warranty claims for bigger parts i.e reverse sensor, brake paddle, suspension)
- Relook at the price of car service

- After sales service
-The material and quality of some accessories

-brake improvement. maybe change rear brake to disk.
-SC need to improve in term of customer service (give them training), waiting area and timing.
-SC must open on Sunday!!

- NVH can be improved but for me it does not matter as I prefer it as it is because with sound, you can detect problems much faster.
- After DRB-Hicom took over Proton, they've deleted the recommended service packages pricing list from the Proton Edar website. Contacted them via email last year, still no response yet.
- Needs to get a better vendor for the headlights.
- SE 1.6 Manual Transmission variant would be nice.

- Quality of finishing
- Overall refinement

- NVH as long distance journeys may be uncomfortable
- Brakes are ok but can use more bite
- CFE version of engine would be nice

Build quality
more build-in accessories
engine noise-proof mat perhaps
fuel consumption need to be improve. bad consumption if compare to car with same engine cc.

Im using the old Proton Saga BLM. There are alot to improve in for the car.
1.)Its a must to change the gear box. The gear is very difficult to change when the engine is cold.
2.)The car is so heavy and have bad acceleration.
3.)Break is no good.

the seat should longer,because there is enough leg room.
the cvt jeking problem is obvious at traffic jam, when the time put and release the oil padel.

Add in ESC for local market cars
Plastics used could be better
Assembly, fit and finishing of dashboard could be better.
Service Centers efficiency could be better. On average, I have to wait for 3 hours to get my car back after a regular oil change.

Increase safety feature
Manual variant for high spec model

Improve the in-car entertainment to the latest style (2 DIN radio)
Add more safety feature (Electronic Stability Control, Traction Control, side airbag)
Improve soundproof system.
Maybe a paddle shift for CVT?

Quality control and build quality needs improvement. Over the years, there are sounds on the car, but not too bad depending on how you treat the car.

The engine is noisy too - this needs to be improved and also the lack of stability control (although yes this is a budget car, but would be good to have this option). Fuel efficiency needs to be improved.

- Build quality need to be improved
- FC need to be improved also
- Need some wow factor for the next production
- Improved the CVT setting

Fuel efficiency
Clarion Head unit with USB / iPOD ready

Quality Control, inspect every car carefully before being sold as it will affect the impression of buyers, definitely needs refinement
Fuel efficiency- bad fuel efficiency

- Not so pleased with the noise when driving. Should improve the soundproof system
- Feels like always being charged extra by the service center. Its better if the price of service can be lowered down.
- More stability needed. Like when turning at corner, driving through a bumper and so on.
- Hope to have build in USB to play music.

Improve the overall fuel consumption , NVH , and build quality !

- Interior design especially the dashboard is not up to date (to install after market 2-din display is not worth because the space for audio is too low; not eye level),
- Service center should be friendlier, more wallet friendly
- Should provide 5 years warranty with unlimited mileage + maybe 3 years free maintenance to attract more people to use it
- General problem to be improved/checked when buying this car (can settle at Service Center):
1) rear braking knocking noise
2) squeaking of front absorber
3) door sensor is not working for me when first get the car
4) driver seat squeaking when lean/squeeze on it.